sales@hikdistribution.com
Industrial camera selection
Explosion protection and corrosion resistance address different risks. Document the site classification, atmosphere, temperature, corrosion exposure, required certification, imaging distance and installation method before comparing an exact camera model.
Start from gas or dust classification, temperature class and required certification.
Request project review Anti-corrosion camerasReview housing material, sealing, salt, chemical exposure and maintenance.
Find anti-corrosion models Industrial PTZ and positioningCompare fixed views with remotely positioned or zoom-capable systems.
View positioning systems Recording and controlMatch lens, streams, analytics and recorder capacity to the monitoring task.
Review NVRs Gas station surveillance planningMap ordinary forecourt coverage separately from formally classified zones and their certification requirements.
Plan gas station coverage Thermal and bi-spectrum optionsTreat thermal sensing as a separate selection path and verify every certification required for the installation area.
Compare thermal cameras36 Produkte
Hazardous and corrosive sites
A collection label is not evidence that every model is suitable for every hazardous or corrosive location. The project specification, local authority requirements and exact certification marking must control the final selection.
Explosion protection concerns ignition risk in a classified atmosphere. Corrosion resistance concerns long-term exposure to salt, moisture or chemicals. A site may require one or both. The housing material, cable entries and mounting accessories must be considered with the camera body.
Document whether the risk involves gas or dust, the zone or division, gas or dust group, temperature class and ambient range. Use the project specification and local authority requirements rather than translating one certification system into another without review.
Specify target distance, scene width, lighting, resolution, lens, infrared needs and whether a fixed, PTZ or positioning system is required. The protective housing should not distract from the camera's core job: producing usable evidence at the required location.
Check approved cable glands, junction boxes, mounts, grounding, surge protection and access for cleaning or service. A correctly rated camera can still create project risk if accessories or installation methods do not match the classified environment.
| Factor | What to check | Why it matters |
|---|---|---|
| Site classification | Gas or dust, zone/division, group and temperature class | Defines the protection concept and certification that may be required. |
| Corrosion exposure | Salt, humidity, chemicals, washdown and housing material | Determines whether corrosion resistance is needed in addition to explosion protection. |
| Imaging | Target distance, field of view, resolution, lens and lighting | Ensures the protected camera still meets the surveillance objective. |
| Camera format | Fixed, motorized lens, PTZ or positioning system | Changes coverage, control, mounting and maintenance requirements. |
| System integration | Power, protocol, streams, analytics, NVR and network design | Confirms recording and control functions work in the wider system. |
| Documentation | Exact model certificate, marking, datasheet and accessory approvals | Provides evidence for project and local compliance review. |
No. Corrosion resistance addresses environmental degradation, while explosion protection addresses ignition risk in a classified location.
It depends on the location classification and jurisdiction. Follow the project specification and local authority, then verify the exact marking on the selected model.
No. Housing material alone does not establish explosion protection. The complete certified design and marking must match the site requirement.
Certification, housing, optical system, PTZ capability, analytics, accessories, cabling and installation requirements can all affect total cost.
Some can, but protocol, firmware, codec, bandwidth, events and power architecture must be checked for the exact camera and recorder.
Provide the site classification, environment, required certificate, target distance, field of view, quantity, destination and installation constraints.
Do not select hazardous-area equipment from marketing language alone. Verify the exact certificate, marking, accessories and installation method for the jurisdiction and classified location.