01 / ENTRANCES
Frame the approach
Record the target distance, direction of movement and mounting position. Check whether the chosen angle captures useful detail without looking mainly at the top of a head.
HIKD / 03 / COVERAGE PLANNING
Design the coverage.
Connect the whole system.
A camera system is a chain: scene, camera, network, recorder and viewing client. Plan every link around the detail you need to capture and retrieve.
SYSTEM / SIGNAL PATHHIKD / 03
HIKD / PROJECT SUPPORT
Keep the task in focus.
Start with the activity that matters at each location. An overview of a yard and a close view of an entrance usually need different framing. Do not treat a wide field of view as proof of usable identification detail.
02 / OPEN AREAS
Keep coverage continuous
Use fixed views for the areas that must remain covered. A PTZ camera changes its field of view as it turns; define operator use, presets and any supporting fixed coverage.
03 / LOW LIGHT
Plan the night scene
Review available light, reflective surfaces, backlight and the required detail on moving subjects. Illumination reach is one parameter; it does not guarantee the same result in every scene.
HIKD / 03
A connected plan, from scene to screen.
The diagram shows the main functional stages. Depending on the recorder and site, cameras may connect to recorder PoE ports or through a separate switch. Confirm power, uplink capacity and supported recording functions for the selected models.
01Cameras
02Network / PoE
03Recorder / storage
04Viewing client
Planning diagram. Connections and power arrangements depend on the selected models.
FAQ
Practical questions
Should every location use the same lens?
Not necessarily. The lens and mounting position should suit the target distance and scene width at each location. Use the exact model specification and a site review to confirm the choice.
Is PoE compatibility enough to confirm the system?
No. Also check the power standard and budget, recorder support, network bandwidth, required events and client functions. Review the complete configuration.
Build a clearer specification.
Send the model, quantity and project requirements for review. Availability, compatibility and commercial terms are confirmed for the specific enquiry.